Manage the Extended Network and Security Settings
●
Click the icon
, and then you can modify the device name and mac
address.
●
Click the icon
to remove one device from the list. For several devices,
select them and click
Delete
to remove them at the same time.
Change the Extender
’s IP
Address
By default, the extender is set to obtain an IP address automatically from the
front router. If you want to use a specific IP address appropriate to your
network demand, please refer to the steps below.
Launch a web browser and type in
http://tplinkrepeater.net
, and then go
to
Settings->Network
webpage.
Select
Use the following IP address
, and then enter the IP address and
gateway manually.
IP Address:
Enter the IP address in dotted-decimal notation
(192.168.0.254 by default).
Subnet:
Enter the subnet mask in dotted-decimal notation that
determines the size of the network (255.255.255.0 by default).
Default Gateway:
Enter the gateway that is in the same subnet as the
IP address in dotted-decimal notation. It is usually the LAN IP address
of your router.
Click
Save
to save the settings.
DHCP Server
DHCP stands for Dynamic Host Configuration Protocol. The DHCP Server will
automatically assign dynamic IP addresses to the devices on the network. This
protocol simplifies network management and allows new wireless devices to be
set to IP addresses automatically.
We do NOT recommend you change the IP address unless you are
quite sure about the IP setting for special network demand.
Random changes may lead to Internet disconnection.
Содержание RE350 AC1200
Страница 1: ...1910011680 REV 1 0 0...
