Connect the Extender to the Internet
Connect
Press the
WPS button
on your router/AP.
Immediately press the
WPS button
on your extender. The
LED
should change from flashing to solid, showing that WPS connection is
successful.
If you are connecting the extender to a dual-band router but only
2.4GHz or 5GHz LED is on, repeat step 1 and 2 again to connect the
other band.
Relocate
Plug the extender into an electrical outlet about halfway between your
router (Host Network) and the Wi-Fi dead zone.
Wait until the
LED is lit with a solid blue. If not, relocate the extender
closer to the router to achieve a good (or better) signal quality.
For more information about using WPS on your router,
please refer to the router manufacturer's user guide.
If the RE LED does not
change from flashing to solid
,
please refer to
Using your Web Browser
.
Some ISP gateways disable the WPS function by
default, if the WPS method fails, please refer to
Using
your Web Browser
.
Содержание RE350 AC1200
Страница 1: ...1910011680 REV 1 0 0...
