PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
39
¾
Local Wireless Name -
Name for the AP.
¾
Region
-
Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the
Save
button
,
then the
Note Dialog appears. Click
OK
.
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection
option.
¾
Channel
-
Determines the operating frequency to be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access point.
¾
Mode -
This field determines the wireless mode which the device works on.
•
11b only -
Only 802.11b wireless stations can connect to the device.
•
11g only -
Only 802.11g wireless stations can connect to the device.
•
11n only -
Only 802.11n wireless stations can connect to the device.
•
11bg mixed -
Both 802.11b and 802.11g wireless stations can connect to the device.
•
11bgn mixed -
All 802.11b, 802.11g and 802.11n wireless stations can connect to the
device.
¾
Channel Width
-
Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾
Enable Wireless Radio -
Select or deselect this check box to allow or deny wireless stations
to access the device.
¾
Enable SSID Broadcast
-
Select or deselect this check box to allow or deny the device to
broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local
area for wireless networks to associate with, they will detect the SSID broadcast by the
device.
)
Note:
To apply any settings you have altered on the page, please click the
Save
button, and then you
will be reminded to reboot the device.
