PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
37
Figure 4-12 Wireless Settings in Repeater mode
¾
Repeater Mode -
Select the mode based on your need.
z
Universal Repeater -
In Repeater mode, the AP with WDS enabled will relays data to
an associated root AP. AP function is enabled meanwhile. The wireless repeater relays
signal between its stations and the root AP for greater wireless range.
z
WDS Repeater -
In Universal Repeater mode, the AP with WDS disabled will relays
data to an associated root AP. AP function is enabled meanwhile. The wireless
repeater relays signal between its stations and the root AP for greater wireless range.
¾
Wireless Name of Root AP -
If you select the radio button before
Wireless Name of Root
AP
, the AP client will connect to the AP according to SSID. Enter the SSID of AP that you
want to access.
¾
MAC Address of Root AP -
If you select the radio button before
MAC Address of Root AP
,
the AP client will connect to the AP according MAC address. Enter the MAC address of AP
that you want to access.
¾
Channel Width
-
Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾
Enable Wireless Radio -
Select or deselect this check box to allow or deny wireless stations
to access the device.
Click the
Survey
button to detect the SSIDs in the local area.
)
Note:
To apply any settings you have altered on the page, please click the
Save
button, and then you
will be reminded to reboot the device.
