5
4.
OLT update command
P1201-08 OLT only need to update a file, if the boot file is too old, we need update boot file in
OLT boot mode, boot upgrade way will be provided separately. OLT the common upgrade method
please see below:
a.
Input command as follows to update OLT FW file(file name include FW )
：
OLT(config)# load packetfile ftp 192.168.1.222 admin admin New16Port_FW_V1.3.1_X000
_171114_1841.img
Broadcast message from root:
Upgrade is in process.
File [New16Port _FW_V1.3.1_X000_171114_1841.img] download .......... OK
File [New16Port _FW_V1.3.1_X000_171114_1841.img] upgrade .......... OK
b.
After update OLT, we need reboot OLT(Note: only reboot OLT,OLT can use new
version)
OLT(config)# reboot
Please check whether data has saved, the unsaved data will lose if reboot system. Are you sure to
reboot system? (y/n)[n]:y
4.
Configure
Service
In
OLT
Discrete
Mode
（
Non-Template
）
This section mainly introduce P1201-08 OLT internet service, voice service and multicast service
in discrete mode in FTTH environment. Mainly introduce the bridge ONT(SFU and Home
Gateway ONT (HGU),The following will introduce the service configuration way for OLT and
ONT according to two types ONT.
