15
Chapter 4
Set Up Internet Connection
Note:
If you have changed the preset wireless network name (SSID) and wireless password during the Quick
Setup process, all your wireless devices must use the new SSID and password to connect to the your network.
4. Click
Finish
to complete the Quick Setup process. You can refer to
Test the Network
Connectivity
to test your Internet connection
4. 2. Set Up an IPv6 Internet Connection
If your ISP provides IPv6 connection and some detailed IPv6 parameters, you can
manually set up an IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, you can run the
Quick Setup to enable
6to4 Tunnel
for permitting IPv6 connection
.
Follow the steps below to set up an IPv6 connection:
1. Visit
http://tplinkwifi.net
, and log in with the password you set for the Controller.
2. Go to
Settings
>
Advanced Settings
>
Internet
.
3. Select your WAN Interface Name (
Status
should be
Connected
) and click the (Edit)
icon.
4. Scroll down the page to enable
IPv6
, and configure the IPv6 parameters.
