manualshive.com logo in svg

TP-Link HC220, Руководство пользователя

Поделиться
Скачать
TP-Link HC220 Скачать руководство пользователя страница 71

67

Chapter 12

 

Customize Your Network Settings

12. 6. 2.  Specify the IPV6 Tunnel with Parameters Provided by Your ISP

 

¾

To specify the 6rd Tunnel

Specify the 6rd tunnel with the parameters provided by my 6rd 
tunnel service provider.

1. 

Visit 

http://tplinkwifi.net

, and log in with the password you 

set for the AP.

2. 

Go to 

Advanced

 > 

Network

 > 

IPv6 Tunnel

.

3. 

Tick the check box, select 

6rd

 as the tunneling mechanism 

and select a WAN connection from the drop-down list.

4. 

According to the parameters provided by your ISP, choose 

Auto

 or 

Manual

. More parameters are needed if you choose 

Manual

.

5. 

Click 

Save

.

Note:

If there is no available WAN connection to choose, make sure you have 
connected to the internet and the connection type is not Bridge.

Now you can visit the IPv6 websites with the 6rd tunnel.

Tips:

The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection 
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.

 

¾

To specify the Map-T Tunnel

Specify the Map-T tunnel with the parameters provided by my 
Map-T tunnel service provider.

I want to:

Done!

I want to:

Содержание HC220















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды