TP-Link EC440-G4u, Руководство пользователя

Страница: 80 / 110

76
Chapter 12
Customize Your Network Settings
2. Go to Advanced > Wireless > WPS , locate the Router PIN section and select 2.4GHz
or 5GHz according to your needs.
3. Make sure the Enable Router’s PIN is turned on, and take a note of the current PIN
of the router. You can also click the Generate button to get a new PIN.
4. On the client device, enter the router’s PIN. (The default PIN is also printed on the
label of the router.)
5. The WPS LED flashes for about two minutes during the WPS process.
6. When the WPS LED is on, the client device has successfully connected to the router.
Note:
1. The WPS LED on the router will light on for five minutes if the device has been successfully added to the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.
12. 7. 4. Method 4: Enter the client device’s PIN on the router
1. Visit http://tplinkwifi.net , and log in with the password you set for the router.
2. Go to Advanced > Wireless > WPS , locate the WPS Settings section and select
2.4GHz or 5GHz according to your needs.
3. Make sure the Enable WPS is turned on, and then select PIN Number .
4. Enter the client device’s PIN, and then click the Connect button.
5. Device has been added successfully! or similar information will appear on the web
management page, which means the client device has successfully connected to
the router. And the WPS LED on the router will light on for five minutes.