TP-Link EC440-G4u, Руководство пользователя

Страница: 79 / 110

75
Chapter 12
Customize Your Network Settings
12. 7. Use WPS for Wireless Connection
You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing
network quickly and easily.
12. 7. 1. Method 1: Use the WPS button
Use this method if your client device has a WPS button.
1. Press and hold the WPS button of the router for about 2 seconds.
2. Press the WPS button of the client device directly.
3. The WPS LED flashes for about 2 minutes during the WPS process.
4. When the WPS LED is on, the client device has successfully connected to the router.
12. 7. 2. Method 2: Use the WPS button on the web management page
Use this method if your client device has a WPS button.
1. Visit http://tplinkwifi.net , and log in with the password you set for the router.
2. Go to Advanced > Wireless > WPS , locate the WPS Settings section and select
2.4GHz or 5GHz according to your needs.
3. Make sure the Enable WPS is turned on, and then click Connect .
4. Press the WPS button of the client device directly.
5. The WPS LED of the router flashes for about 2 minutes during the WPS process.
6. When the WPS LED is on, the client device has successfully connected to the
router.
12. 7. 3. Method 3: Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN.
1. Visit http://tplinkwifi.net , and log in with the password you set for the router.