130
2
Visit
http://tplinkmodem.net
, and log in with password you set for the modem
router.
3
Go to
Advanced
>
Operation Mode
page.
4
Select the
Wireless Router Mode
option or the
3G/4G Router Mode
, then click
Save
to make the settings effective.
T7 How to use the WDS Bridging function to extend my wireless
network?
My house covers a large area. The wireless network coverage of the router I’m using
(the root router) is limited. I want to use an extended router to extend the wireless
network of the primary router. Follow the steps to configure the modem router.
1
Visit
http://tplinkmodem.net
, and log in with password you set for the modem
router.
2
Configure the
LAN IP address
of the modem router in the same subnet as the root
router. For example, the IP address of the root router is 192.168.0.1, the IP address
of the extended router should be from 192.168.0.2 to 192.168.0.254.).
3
Go to
Advanced
>
Wireless
>
Advanced Settings
page and locate the
WDS
section.
Select the wireless network 2.4GHz or 5GHz according to your wireless client.
4
Select the check box to enable the WDS Bridging function.
5
Click
Survey
to scan all the AP devices and choose the root AP to be bridged.
