TP-Link Archer C50(EU)3.0, Руководство пользователя

Страница: 11 / 83

8
Chapter 2
4 ) Connect the power adapter to the router and turn on the router
.
5 ) Verify that the hardware connection is correct by checking these LEDs.
Power
On
5G
On
On
Internet 2.4G
On
Note:
If the 2.4G and 5.0G Wi-Fi LEDs are off, press and hold the Wi-Fi/WPS button on the rear panel for more than 5 seconds
to turn them on.
2. Connect your computer to the router.
•
Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet cable
• Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom
of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device,
and then select the SSID to join the network.
OR
Connections are available
Wireless Network Connection
Connect automatically Connect
TP-Link_XXXX
TP-Link_XXXX_5G
Wi-Fi
Wi-Fi
TP-Link_XXXX
TP-Link_XXXX_5G
CHOOSE A NETWORK...
Other...
< Settings
Computer Smart Device
Smart Device Computer
• Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB network cards,
can be connected to your router through this method ( Not supported by iOS devices).
Note :
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.