TOYOTA
4-RUNNER
2006 -
TOWING HITCH
Procedure
Page 3 of 7 pages
Issue: C 07/06/05
(e) For vehicles equipped with air suspension,
loosen the air suspension cover by removing
the plastic fastener. Save fastener for
reinstallation. (Fig. 2-4)
(f) Using panel pry tool, unclip harness from the
frame. Install harness clamp close to harness
connector (around black wrap). Secure
harness to frame and trim excess on cable tie.
(Fig. 2-5)
(g) Remove the two (2) M8 bolts securing the
factory wiring bracket to the frame. Discard
the two (2) bolts. (Fig. 2-6)
(h) Remove the two (2) M6 bolts connecting the
7-pin plug to the bracket, slide the plug from
the bracket. Discard the bolts and factory
wiring bracket. (Fig. 2-7)
Fig. 2-5
Panel Pry Tool
Fig. 2-4
Nylon Panel Removal Tool
Fig. 2-6
Socket, 12 mm
Fig. 2-7
