manualshive.com logo in svg

Toyota Previa, Руководство пользователя


Поделиться
Скачать
background image

134

TANDEM MASTER CYLINDER BRAKE
SYSTEM
The tandem master cylinder brake sys-
tem is a hydraulic system with two sepa-
rate sub-systems. If either  sub-system
should fail, the other will still work. Howev-
er, the pedal will be harder to press, and
your stopping distance will be longer.
Also, the brake system warning light may
come on.

CAUTION

!

Do not drive your vehicle with only
a single brake system. Have your
brakes fixed immediately.

BRAKE BOOSTER
The brake booster uses engine vacuum to
power-assist  the brakes. If the engine
should quit while you are driving, you can
bring the vehicle to a stop with normal
pedal pressure. There is enough reserve
vacuum for one or two stops - but no
more!

CAUTION

!

Do not pump the brake pedal if the
engine stalls. Each push on the
pedal uses up your vacuum re-
serve.

Even if the power assist is com-
pletely lost, the brakes will still
work. But you will have to push
the pedal hard-much harder than
normal. And your braking dis-
tance will be longer

ANTI-LOCK BRAKE SYSTEM

(with “ABS” warning light)
The anti- lock brake system is designed to
automatically prevent lock- up of the wheels
during sudden braking or braking on slip-
pery road surfaces. This assists in providing
directional stability and steering perfor-
mance of the vehicle under these circum-
stances.
The anti- lock brake system becomes op-
erative after the vehicle has accelerated to
a speed in excess of approximately 10 km/h
(6 mph). It stops operating when the vehicle
decelerates to a speed below approximate-
ly 5 km/h (3 mph).
You may hear a sound in the engine
compartment for a few seconds when the
engine is started or just after the vehicle
is started. This means that the anti-lock
brake system is in the self check mode,
and does not indicate a malfunction.

Effective way to press the “ABS” brake
pedal:

When the anti-lock brake system func-
tion is in action, you may feel the brake
pedal pulsating and hear a noise. In this
situation, to let the anti-lock brake sys-
tem work for you, just hold the brake
pedal down more firmly. Do not pump
the brake. This will result in reduced
braking performance.

The brake pedal pulsation caused by the
anti-lock  brake system may indicate haz-
ardous road surface conditions. Although
the anti-lock brake system assists in pro-
viding vehicle control, it is still important to
drive with all due care, because the anti-
lock brake system cannot overcome the
laws of physics that act on your vehicle:

Braking capability is dependent on tire
friction with the road surface.

Even though the anti-lock brake sys-
tem is operating, a driver cannot main-
tain full control on certain slippery road
surfaces, when cornering at high
speeds, or in violent maneuvers.

Avoid high speeds on wet roads. The
anti-lock  brake system cannot elimi-
nate the risk of hydroplaning and loss
of tire friction.

Brake system

Содержание Previa
















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Previa

Pacbrake 10475 Installation Manual preview
10475
Бренд: Pacbrake Страницы: 9
Baja Designs S8 Instructions Manual preview
S8
Бренд: Baja Designs Страницы: 6
K&M 8494 Installation Manual preview
8494
Бренд: K&M Страницы: 3
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Бренд: Kia Страницы: 419
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Бренд: GReddy Страницы: 9
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Бренд: CARRYBOY Страницы: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Бренд: GMC Страницы: 428
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Бренд: MAXWORKS Страницы: 7
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Бренд: Raptor Series Страницы: 6
Rati Armster 2 User Manual preview
Armster 2
Бренд: Rati Страницы: 2
Cadillac 1993 Seville Owners Literature preview
1993 Seville
Бренд: Cadillac Страницы: 407
Toyota Sienna 2021 Manual preview
Sienna 2021
Бренд: Toyota Страницы: 600
Kia Optima 2004 Owner'S Manual preview
Optima 2004
Бренд: Kia Страницы: 233
Mercedes-Benz ML 320 CDI Operator'S Manual preview
ML 320 CDI
Бренд: Mercedes-Benz Страницы: 585
WABCO TEBS E Manual preview
TEBS E
Бренд: WABCO Страницы: 224
Prorack K349 Fitting Instructions Manual preview
K349
Бренд: Prorack Страницы: 13
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Бренд: Edelbrock Страницы: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Бренд: Hudson Страницы: 77

Бренды по названию

Популярные бренды

Загрузить еще бренды