Toyota Previa, Руководство пользователя

Страница: 107 / 175

102
RM (Radio Monitor)
The radio monitor feature allows you to
listen to the radio while a cassette is being
rewound or fast forwarded.
Push “RM”. “RM” will appear on the dis-
play. Any time you are rewinding or fast
forwarding a cassette tape, the radio will
play the station that was set most recent-
ly. (You can not change the radio station
unless you switch out of the cassette play-
er function.)
Push “RM” again to turn off the RM fea-
ture.
RPT (Repeat)
The repeat feature automatically replays
the current cassette or compact disc
track.
Push “RPT” while the track is playing.
“RPT” will appear on the display. When
the track ends, it will automatically be re-
wound (cassette) and replayed. This pro-
cess will be continued until you push the
button again to turn off the repeat feature.
Cassettes—There must be at least 3 sec-
onds of blank space between tracks in or-
der for the repeat feature to work correct-
ly.
Scan
Radio
You can either scan all the frequencies on
a band or scan only the preset stations for
that band.
To scan the preset stations: Quickly push
and release “SCAN”. If you hear a beep,
you held the button too long, and the radio
will scan all the frequencies. The radio will
tune in the next preset station up the
band, stay there for a few second, and
then move to the next preset station. To
select a station, push “SCAN” a second
time.
To scan all the frequencies: Push “SCAN”
until you hear a beep. The radio will find
the next station up the station band, stay
there for a few seconds, and then scan
again. To select a station, push “SCAN” a
second time.
Cassette player
The cassette player scan feature is similar
to the radio scan feature and uses the
same button.
Push “SCAN”. “SCAN” will appear on the
display. The player will fast forward to the
next cassette track, play it for 12 seconds,
and then scan again. To select a track,
push “SCAN” a second time. If the player
reaches the end of one side of a cassette
tape, it will continue scanning on the other
side.
Compact disc player
The compact disc player scan feature is
similar to the radio scan feature.
Push “SCAN”. “SCAN” will appear on the
display. The compact disc player will play
the next track for 10 seconds, then scan
again. To select a track, push “SCAN” a
second time. If the player reaches the end
of the disc, it will continue scanning at
track 1.
SKIP
The skip feature allows you to fast forward
past long stretches of blank tape. This is
especially useful at the end of cassettes.