Toyota Previa, Руководство пользователя

Страница: 113 / 175

108
Cleaning the security code
1. Turn off the audio system.
Turn the ignition key to “ACC”.
Simultaneously push and hold in “1”, “6”,
and “PWR/VOL” until “SEC” appears on
the display.
2. While you are holding in the “
∧
” side of
“TUNE”, push “1”.
The display will read “—”.
On some models, “
” and “ ” will also
turn on.
3. Input the existing three-digit code.
You have 10 seconds to enter each digit.
For example, “209”:
To set the first digit: Push “1” until the digit
you want appears on the display.
To set the second digit: Push “2” until the
digit you want appears on the display.
To set the third digit: Push “3” until the digit
you want appears on the display.