Fitting Instructions
UH9000S / UH9060S / UH9080S
Page 13 of 16
6.
Slide the UHF CB transceiver into the cradle and connect
the power lead.
7.
Fit the antenna adapter (supplied) to the antenna cable
and connect to the UHF CB transceiver.
UH9060S / UH9080S
1.
Fold back the insulation padding from the underside of the
front passenger’s side instrument panel under cover sub-
assembly. Secure the UHF CB transceiver cradle in the
position shown using the double sided tape provided.
Trim double sided tape to suit..
WARNING
If the indicated location is not suitable, do not install the
UHF CB transceiver cradle and radio in a location that may
interfere with the operation and deployment of the SRS
airbags or seatbelt pretensioners, including driver, front
passenger and knee SRS airbags if fitted. Doing so may
result in serious injury or death.
2.
Assemble the (2) slide mount brackets to the UHF CB
transceiver using the (2) screws supplied.
