Fitting Instructions
UH9000S / UH9060S / UH9080S
Page 11 of 16
7.
Position the power lead patch harness fuse holder/s neatly
behind the driver’s side instrument panel finish cushion
and carpet. Cable tie [ ] using self-adhesive cable tie
mounting blocks where necessary to avoid fouling and
rattling.
8.
Refit the driver’s side instrument panel finish cushion
leaving the UHF CB transceiver power lead and antenna
cable trailing below the panel.
Power Lead Patch Harness - UH9060S / 9080S
1.
Route the power lead patch harness from the left hand
side of the passenger’s side footwell, below the carpet line,
behind the bottom edge of the console box assembly to
the rear power socket connector.
