Toyota ECO 26 A-SP20, Инструкция по эксплуатации

Страница: 46 / 52

46
3
Attaching the Bobbin Case
1
Insert the bobbin case from the front.
The red mark
a
on the bobbin case
should be in the position, as shown in the
diagram.
2
Align the red mark
a
and
b
, and attach
the needle plate with the projection
c
on the bobbin case positioned as shown
in the diagram.
Make sure that bobbin case moves
slightly from side to side as indicated
by the arrow.
4
Tighten needle plate clamp screws.
Turn the handwheel and see if hook
moves smoothly.
When the bobbin case is attached
incorrectly, the handwheel is heavy and
does not turn smoothly.
At that time remove the needle plate and
the bobbin case, attach them again.
Attach the needle and presser foot.
Check that the needle correctly enters
the hole in the needle plate.
Needle plate screw
(2 screws)
Hole in
needle plate
c
b a
b a
Needle plate
a