manualshive.com logo in svg

Toyota ECO 26 A-SP20, Инструкция по эксплуатации

Поделиться
Скачать
Toyota ECO 26 A-SP20 Скачать руководство пользователя страница 45

45

2

• Feed dog and hook maintenance

If the sewing machine makes a loud noise or rotates slowly, or there could be thread 
waste or dust in the hook or feed dog. Perform maintenance on the hook and the feed 
dog.

Do not use detergent, 
bleach, benzine, or 
thinner chemical cloths.

Doing so could cause 
discoloration or cracking.

Before cleaning 
the hook, remove 
the power plug 
from the outlet. 

Not doing so could 
cause an injury.

Attention

Cleaning the feed dog and hook

1

Remove presser foot and needle.
Use a screwdriver to loosen the screws 
in the needle plate, and then remove the 
needle plate.

Lift bobbin case in the direction of the 
arrow and remove it.

3

Brush off lint and dust on feed dog and 
hook, then clean it with a soft cloth.
A vacuum cleaner wand or hose may be 
used to remove lint from this area.

Presser foot

Bobbin case

Caution

Feed dog

Hook

Maintenance

Needle plate screw 
(2 screws)

Содержание ECO 26 A-SP20





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды