AVALON_Navi_U (L/O 0205)
29
2003 AVALON NAVI (OM41403U)
If you want to set a preferred road point
between the starting point and the destina-
tion or change the search condition, push
the
“ENT”
button on the navigation con-
troller to display the menu switches. And
then select the
“Edit route”
switch on
the screen. The screen changes and dis-
plays the edit route menu. (For details,
see page 82.)
You can start the route guidance by se-
lecting the
“Start”
switch on the screen
or starting to move your vehicle.
When you keep pushing the
“ENT”
but-
ton on the navigation controller until you
hear a beep, “demo” mode will start.
Route preference:
To change the conditions of the route
preference.
Select the
“Edit route”
switch, and
the “Edit route” screen appears.
Select the
“Route preference”
switch.
Select either
“Allow”
or
“Detour”
switch. When you select the
“OK”
switch, the system starts searching for
a route up to the destination.
Even if you select the
“Detour”
switch, it cannot be avoid in some
cases.
INFORMATION
If the calculated route includes a trip
by ferry, the route guidance shows a
sea route. After you travel by ferry,
the current vehicle position may be
incorrect. Upon reception of GPS sig-
nals, it is automatically corrected.