Toyota 40--8FD35N Скачать руководство пользователя страница 72

Страница: 72 / 92

17 EMERGENCY PROCEDURE

en‐73

Remove both ends of the red cable.

17.2 LIFTING THE TRUCK

WARNING

•

Never use a cable that has kinks, distortions, fraying or friction damage.

•

Never walk under a suspended forklift.

•

Never use the overhead guard to hoist the truck.

Observe the following cautions when lifting
the forklift:

▪ Lift the forklift using the lifting points. The

lifting points are indicated on the warning
labels attached to the forklift.

▪ Use a wire cable or strap which has the

capacity for lifting the forklift.

▪ When required to attach a wire cable or

strap  to  the  top  of  the  collapsed  mast
use  an  aid  such  as  a  ladder.  Do  not
climb  on  any  parts  of  the  forklift  e.g.
counterweight  and  then  overhead  guard
to  gain  access  to  lifting  points  on  the
mast as you may fall.

Содержание 40--8FD35N





























































































Результаты поиска

Содержание 40--8FD35N

Отзывы:

Похожие инструкции для 40--8FD35N

Бренды по названию

Популярные бренды

Toyota 40--8FD35N, Руководство пользователя

Результаты поиска

Содержание 40--8FD35N

Отзывы:

Похожие инструкции для 40--8FD35N

Бренды по названию

Популярные бренды