Toyota 40--8FD35N, Руководство пользователя

Страница: 53 / 92

13 LPG DEVICE ﴾OPTION﴿
en‐54
13.5.3 Installing LPG tank
Swing type
(1)
Swing­down type
(1)
(1) Marking
WARNING! You must be trained and au‐
thorised to replace the tank.
WARNING! Wear leather gloves or other
protective equipment when replacing the
LPG tank. LPG can freeze hands and fin‐
gers in case the gas leaks.
1. Put the LPG tank on the bracket. The tank
must be placed with the correct side up. Find
a hole for indexing pin or marking on the
tank. It must face upward or rearward.
Swing type
Swing­down type
2. Put bands over the tank, hook clamps to
bands and push clamps up to clamp the tank.
(1)
(1) Set pin (lower side)
3. For swing­down type, unlock the tank
bracket by pulling the set pin (lower side) un­
der the tank bracket. Raise the tank bracket
and fix the set pin.
WARNING! It is dangerous to unlock the
set pin without a full tank because the
bracket may raise up suddenly due to the
spring force. To raise the bracket unlock
the set pin only when there is a full tank
on the bracket. Remove the set pin, turn
the tank bracket around the pivot and en‐
sure the bracket stopper knob is securing
the bracket in place.