Toyota 40--8FD35N, Руководство пользователя

Страница: 18 / 92

10 SWITCHES AND LEVERS
en‐19
10.2 Direction control lever
(1) Forward
(2) Reverse
Shift lever to change the travel direction
between forward and reverse.
Forward travel ­ Push the lever forward
Reverse travel ­ Pull the lever backward
The neutral position is halfway between the
forward and reverse position.
Forward and reverse travel speed can be ad­
justed by the amount the accelerator pedal is
depressed.
CAUTION
• Always operate the control lever from a normal seated position.
• The engine cannot be started unless the direction control lever is in the neutral position.
• Stop the truck before shifting between forward and reverse direction.
NOTICE
• To restart powered travel after the activation of the OPS, release the accelerator pedal,
return the direction control lever to the neutral position and sit in the seat. Sitting in the
seat without returning the direction control lever to the neutral position will not allow
powered travel.
10.3 Parking brake lever
(1) Released
(2) Locked
(3) Release knob button
(4) Grip
When parking the truck, grasp the grip of the
parking brake lever and fully pull it toward
you.
When releasing the brake, push back the
lever while pressing the release knob button.
While operating the parking brake lever, keep
the brake pedal fully depressed.
WARNING
• Before applying the parking brake, depress the brake pedal and always confirm that the
truck has come to a stop.
• Never hold the lever at other than the grip because a finger may be pinched. When re­
leasing the parking brake by holding the lever for starting on a slope for example, hold the
grip at above the protrusion.
• Do not park the truck on a slope. Always park on level ground with forks flat on the floor
so that no one will run into them or trip over them. If parking on a slope is unavoidable,
place blocks behind the wheel to prevent the truck from rolling.
• Traveling without releasing the brake will damage the truck and brakes.
• If the parking brake is engaged when the direction control lever is in traveling position, a
warning will sound to warn the operator. If the truck is operated without disengaging the
parking brake, the brakes will lose effectiveness to hold the truck when the parking brake
is applied. Ask the Toyota dealer for an inspection.
• If the operator leaves the truck or turns off the key switch without engaging the parking
brake, a warning will sound to warn the operator. When leaving the seat, always apply the
parking brake, turn the key switch off and remove the key.
10