Toyota 2002 Land Cruiser Скачать руководство пользователя страница 58

Страница: 58 / 414

’02 L/C U (L/O 0108)

The SRS (Supplemental Restraint Sys-

tem) airbags are designed to provide
further protection for the driver and

front passenger in addition to the pri-

mary safety protection provided by the
seat belts.

In response to a severe frontal impact,
the SRS airbags work together with the

seat belts to help reduce injury by inflat-

ing. The SRS airbags help to reduce inju-
ries mainly to the driver’s or front passen-

ger’s head or chest directly hitting the

steering wheel or dashboard. The front
passenger airbag is activated even with

no passenger in the front seat.
Be sure to wear your seat belt properly.

CAUTION

A driver or front passenger who is
too close to the steering wheel or

dashboard during airbag deployment

can be killed or seriously injured. To-
yota strongly recommends that:

The driver sit as far back as pos-

sible from the steering wheel while
still maintaining control of the ve-

hicle.

The front passenger sit as far back

as possible from the dashboard.

All vehicle occupants be properly
restrained using the available seat

belts.

This indicator comes on when the igni-

tion key is turned to the ”ACC” or
”ON” position. It goes off after about

6 seconds. This means the SRS airbags

are operating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, inflators, warning light, interconnect-

ing wiring and power sources. (For details,

see ”Service reminder indicators and
warning buzzers” in Section 1

−

5.)

SRS driver and front

passenger airbags

Содержание 2002 Land Cruiser































































































































































































































































































































































































































Результаты поиска

Содержание 2002 Land Cruiser

Отзывы:

Похожие инструкции для 2002 Land Cruiser

Бренды по названию

Популярные бренды

Toyota 2002 Land Cruiser, Руководство пользователя

Результаты поиска

Содержание 2002 Land Cruiser

Отзывы:

Похожие инструкции для 2002 Land Cruiser

Бренды по названию

Популярные бренды