Toyota 2002 Land Cruiser Скачать руководство пользователя страница 63

Страница: 63 / 414

’02 L/C U (L/O 0108)

Do not allow a child to stand up or

to kneel on the front passenger

seat, since the airbag inflates with

considerable

speed

and

force.

Otherwise, the child may be killed

or seriously injured.

Do not hold a child on your lap or

in your arms. Use a child restraint

system in the rear seat. For instruc-

tions concerning the installation of

a child restraint system, see ”Child

restraint” in this section.

Do not put objects or your pets on

or in front of the dashboard or

steering wheel pad that houses the

airbag system. They might restrict

inflation or cause death or serious

injury as they are projected rear-

ward by the force of deploying air-

bags. Likewise, the driver and front

passenger should not hold objects

in their arms or on their knees.

Do not modify or remove any wir-

ing. Do not modify, remove, strike

or open any components such as

the steering wheel pad, steering

wheel, column cover, front passen-

ger airbag cover, front passenger

airbag or airbag sensor assembly.

Doing so may cause sudden SRS

airbag inflation or disable the sys-

tem, which could result in death or

serious injury.

Failure to follow these instructions
can result in death or serious injury.

Consult your Toyota dealer about any
repairs and modifications.

Содержание 2002 Land Cruiser































































































































































































































































































































































































































Результаты поиска

Содержание 2002 Land Cruiser

Отзывы:

Похожие инструкции для 2002 Land Cruiser

Бренды по названию

Популярные бренды

Toyota 2002 Land Cruiser, Руководство пользователя

Результаты поиска

Содержание 2002 Land Cruiser

Отзывы:

Похожие инструкции для 2002 Land Cruiser

Бренды по названию

Популярные бренды