TOYODenki EDM series, Инструкция по эксплуатации

Страница: 5 / 28

! Danger
・
Do not operate the motor in state that the cover of terminal box is removed. After work, fit
the cover of terminal box at the original position. Otherwise, that could result in electric
shock.
(Piping, wiring)
・
Connection with power supply cable should be done in accordance with connection diagram
or Instruction Manual. Erroneous wiring could result in electric shock and fire.
・
Do not bend or pull or put between something the power supply cable and lead wire of motor
forcibly. Otherwise, that could result in electric shock.
(Operation)
・
Never approach to or contact the rotating objects (shaft, etc.) during operation. Otherwise,
that could result in injury by being caught.
・
When power is interrupted, turn off the power supply surely. Otherwise, that could result in
injury when power is supplied again.
(Maintenance and inspection)
・
Connection with power supply cable should be done in accordance with connection diagram
or Instruction Manual. Erroneous connection could result in electric shock and fire.
! Caution
(General)
・
For installation place of motor, secure safe and adequate space for maintenance and
inspection. Otherwise, trouble of electric shock and injury could occur.
・
Do not use the motor under out of specifications of that motor. Otherwise, that could result in
electric shock, injury, breakage, etc.
・
Do not insert finger or object into the aperture of motor. Otherwise, that could result in
electric shock, injury, fire, etc.
・
Do not use damaged motor. Otherwise, that could result in injury, fire, etc.
・
In case of work at high place, prepare enough measures for prevention of drop. Otherwise,
trouble of injury by drop could occur.
・
Since remodeling by user is out of range of our guarantee, we are not responsible for it.
・
Do not put obstacles in front of motor name plate in order for operator to see it at any time.
・
Do not remove the name plate.
(Transportation)
・
Since drop and falling down of the product during transportation is dangerous, please pay
enough attention for such work. As to motor, surely use designated position for hanging. After
installation of motor combined with machine, do not hang whole set of motor-machine at the
position for hanging of motor only. Before hanging, confirm mass of motor by name plate,
packing case, outline drawing, catalog, etc. and do not hang the heavier motor than the rated
load of hanger. Breakage of hanger and consequent drop as well as falling down could result
in breakage of motor and injury.
(Unpacking)
・
Unpack the case after confirmation of top and bottom. Otherwise, that could result in injury.
・
Confirm whether reached product is just the ordered one. Installation of erroneously
delivered product could result in injury, breakage, etc.
(Installation, adjustment)
・
Never place any inflammable objects around the motor. Otherwise, that could result in fire.
・
Do not place any objects which prevent ventilation, around the motor. Otherwise, that could
result in burn and fire by extraordinary overheat caused by prevention of cooling
・
When motor is connected with machine, pay attention on centering, belt-setting, parallel
degree of pulley, etc. In case of series connection, pay attention on direct-connection accuracy.
In case of belt connection, adjust tensile strength of belt correctly. Before operation, tighten
clamp bolts of pulley and coupling firmly. Otherwise, trouble of injury and breakage of
equipment caused by scattering of fragments could occur.
・
Avoiding touch with rotating part, mount the cover, etc. Otherwise, that could result in
injury.