TCWS.54NGST04D_120517-20
5056.425183D
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufac-
turer's instructions and all applicable codes and requirements of the authority having jurisdiction.
If the information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit.
The installation is not proper and complete until the operation of the converted appliance is checked
as specified in the manufacturer's instructions supplied with the kit.
If this unit is to be used on propane convert as follows using the components supplied with the pro-
pane gas conversion kit. Propane conversion kit part number is TCWS.54DSTLPKIT.
Note: Factory supplied components must be used to ensure correct input. After conversion confirm
proper manifold pressure.
CAUTION
The gas supply and electrical power breaker shall be shut off before proceeding with the conversion.
1. If installed, remove the burner media (rocks, glass, etc.) from the burner tray. Remove the edge
panels, burner tray and the burners.
2. Using a 1/2” wrench, undo the natural gas burner orifices (Figure 33) and replace with the pro-
pane gas orifices included in the conversion kit. Apply a small amount of pipe joint compound to
the threads of the propane burner orifice to ensure a good seal, before screwing it into the mani-
fold.
Orifices
Manifold
Figure 36: Orifice location.
12
Propane Conversion
