2. Connect spark electrode wire
(ORANGE) to the rear electrical bulk
head fi tting. Connect the fl ame sensor
wire to the front electrical bulk head
fi tting. (Fig. #2)
3. Tilt burner tray length-wise and insert
into the fi rebox. (Fig. #3)
4. While supporting one end of the
burner tray, connect gas line to the tee
on the underside of the burner tray.
(Fig.
#4)
CAUTION:
Ensure that all connections are gas
tight.
5. Re-attach pilot to burner tray. (Fig. #5)
Fig #2
Fig #3
Fig #4
Fig #5
3
TCWS.54NG04.C 040907
