SETTING UP
1.
Remove your appliance from the
packaging.
2.
Check that there is no damage to the
cord or any visible damage to the body.
3.
Check that all listed parts are present.
4.
Remove any stickers or labels from the
appliance.
DO NOT
remove the rating
plate or any warnings.
5.
Dispose of the packaging in a
responsible manner.
6.
Locate the appliance on a stable,
horizontal, even and heat-resistant
surface in accordance with the
Important safety information
section.
7.
Wash and dry the accessories and air
fryer oven, following the instructions in
the
Cleaning and care
section.
Before first use
TRIAL RUN
The appliance should be used for the
first time without any food in it, in order
to remove any manufacturing coating
residues. The appliance may produce
some smoke or odours during this
process.
Allow the appliance to heat up on the
highest temperature setting for approx.
15 minutes, with no food inside.
1.
Connect the plug to a mains wall
socket.
2.
Close the appliance door.
3.
Press the
key to bring up the touch
control panel.
NOTE:
The appliance will automatically
enter standby mode after 90 seconds
if no keys are pressed after the control
panel has illuminated.
4.
Press the timer arrow keys to adjust
the operating time to 15 minutes.
5.
Press the temperature arrow keys to
adjust the temperature setting
to 200°C.
6.
Press the
key.
The heating element and fan will
begin to operate, the fan and heating
indicators will illuminate and the timer
will begin counting down.
7.
When the set time has elapsed, the
appliance will emit a series of beeps,
the screen will display ‘00’, and the
screen and the key will flash.
8.
Remove the plug from the mains
power socket.
9.
Allow the appliance to cool down.
PRE-SET PROGRAMS
7
