3
If you’re not a member of a club, your local hobby shop has
information about clubs in your area whose membership
includes experienced pilots.
8. While this kit has been
fl
ight tested to exceed normal use,
if the plane will be used for extremely high-stress
fl
ying
the modeler is responsible for taking steps to reinforce the
high-stress points.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and
fl
yability of your
fi
nished model depends on how
you build it; therefore, we cannot in any way guarantee the
performance of your completed model, and no representations
are expressed or implied as to the performance or safety of
your completed model.
REMEMBER:
Take your time and follow the instructions to
end up with a well-built model.
ADDITIONAL ITEMS REQUIRED –––––––
Radio Components
A minimum 3-channel radio (elevator, rudder and ESC control)
and two standard or mini servos with 35oz. of thrust are required
to
fl
y the Vista BL EP ARF. The Tactic TTX404 4-channel or
Futaba 4YF 4-channel radio system are great low cost radio
systems perfect for the Vista BL EP ARF.
■
TACJ2404 TTX404 4-channel radio system
■
TACM0235 (TSX35) standard servo
■
TACM0220 TSX20) mini servo
■
FUTK4200 4YF 4-channel radio system
■
FUTM0031 (S3003) standard servo
■
FUTM0415 (S3115) micro precision servo
■
TOWM4525 (TS-53) standard servo
Battery and Charger
■
A 3S 11.1V 1800mAh – 2200mAh LiPo battery is required
to power the Vista BL EP ARF
■
ElectriFly 1800mAh 30C (GPMP0855)
■
ElectriFly 2200mAh 30C (GPMP0861)
■
FlightPower 2200mAh 30C (FPWP3223)
■
FlightPower 2200mAh 50C (FPWP5223)
Most modelers may already have a suitable LiPo charger, but
for those that do not, the Duratrax Onyx 235 AC/DC Advanced
Peak Charger (DTXP4235) is one of the suitable chargers
recommended. The Onyx charger is perfect for 3S batteries
used with the Tower Vista BL EP ARF and may be powered
either by an external DC power source (such as a 12V battery),
or a 110V AC outlet. The Onyx also has an adjustable charge
rate to charge your batteries in as little as a half-hour or less
(depending on the condition of your batteries and manufacturer’s
speci
fi
ed charge rate). The Onyx can also charge larger batteries
and batteries other than LiPo, so it is a versatile charger you can
grow into. The 235 also has and LCD digital display screen, so
you can see how much capacity it took to recharge the battery
(required for monitoring the condition of your batteries and
calculating how long you can
fl
y).
Adhesives and Building Supplies
■
Tower 30-minute epoxy (TOWR3810)
■
Mixing sticks (50, GPMR8055)
■
Mixing cups (GPMR8056)
■
Epoxy brushes (6, GPMR8060)
■
Denatured alcohol (for epoxy clean up)
■
Masking tape
■
Drill
■
Drill bits: 1/16" [1.6mm]
■
Stick-on segmented lead weights (GPMQ4485)
■
#1 Hobby knife (TOWR1010)
■
#11 blades (5-pack, TOWR1015)
■
Medium T-pins (HCAR5150)
■
CG Machine (GPMR2400)
■
Paper towels
Hardware and Accessories
■
Spare #64 rubber bands (TOWQ1220)
■
21st Century Sealing Iron (COVR2700)
■
21st Century Hot Sock (COVR2702
KIT INSPECTION –––––––––––––––––––––––
Before assembly, take an inventory of this kit to make sure it is
complete, and inspect the parts to make sure they are of acceptable
quality. If any parts are missing or are not of acceptable quality, or
if you need assistance with assembly, contact
Product Support
.
When reporting defective or missing parts, use the part names
exactly as they are written in the Kit Contents list.
Hobbico Product Support
Ph: (217) 398-8970 ext. 5
3002 N Apollo Drive Suite 1
Fax: (217) 398-7721
Champaign, IL 61822
E-mail: [email protected]
ORDERING REPLACEMENT PARTS ––––
Replacement parts for the Tower Hobbies Vista BL EP ARF are
available using the order numbers in the
Replacement Parts
List
that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at www.
hobbico.com. Choose “Where to Buy” at the bottom of the menu
on the left side of the page. Follow the instructions provided on
the page to locate a U.S., Canadian or International dealer.
Parts may be ordered directly from Hobby Services by calling
(217) 398-0007, or via facsimile at (217) 398-7721, but full retail
prices and shipping and handling charges will apply. Illinois
and Nevada residents will also be charged sales tax. If ordering
via fax, include a Visa
®
or MasterCard
®
number and expiration
date for payment.
