13
❏
3. Before using any glue, test fi t the sides, top, bottom,
front and back of the motor mount box together. Make sure
the arrows on the front and back point toward the top of the
mount box and that the arrow on the bottom of the mount
box points toward the front of the box.
❏
4. Holding the assembly together, use medium CA to glue
the box together. Use care not to get any CA on your fi ngers.
Do not build up large glue fi llets until after the next step.
❏
5. Glue the triangle reinforcements around the back and
front—use medium CA and stick them into place with a hobby
knife. Reinforce all glue joints where necessary.
❏
6. Round the top, forward corners of the motor mount box
to clear the cowl as shown.
Mount the Brushless Motor
❏
1. Mount the motor mount box to the fi rewall with four
M3 x 12 Phillips machine screws, M3 fl at washers, M3 lock
washers and threadlocker.