tousek
/ E_TURN-310UF_43000203 / 19. 03. 2013
- 3 -
Characteristics TURN 310 UF
• for 230V a.c.
• max. weight of gate wings 400 kg
• max. wing size 3 m (from wing size of 2,5 m on an e-lock
is recommended
• galvanized sheet steel- or stainless steel housing
•
1. General
Underfloor operator TURN 310 UF
General features
The underfloor operator TOUSEK TURN 310 UF is suitable for the automation of swing gates, whereas the full operating unit is
installed under the ground.
This operator was especially developed for swing gates in the private area, which are not exposed to continuous operation.
It distinguishes itself by it’s rather compact shape and the adjustable limit switches which are integrated in its housing.
The motor unit is installed in a massive sheet steel housing, which is optionally also available in stainless steel (TURN 310 UF/E).
This housing is constructed the way, that it also serves as bearing for the gate at the same time.
The gate weight (max. 400 kg) is carried by this bearing, and the motor-gearing unit can so be easily removed and installed without
dismounting the gate.
The operator ensures the blocking of the gate and so usually no e-lock is required. But according to the individual case of mounting,
an additional locking device may be necessary (at wings larger than 2,5 m we recommend the installation of an e-lock).
With a key for emergency release the gate can be opened manually in case of a power failure.
for connection an optional
terminal box (IP 66), which will be placed into
the operator housing, is available.
(see additional manual)
Technical data
Underfloor operator TURN 310 UF
operating voltage
230V a.c., 50Hz
wing weight
max. 400kg
current consumption
max. 1,5 A
protection class
IP66
max. turning angle
110º, optional > 110º
Article no.
max. angular velocity
6º /s
TURN 310 UF
11230100
max. torque
300Nm
TURN 310 UF/E (
stainless steel
)
11230110
operating factor
30%
additional bracket for
180° opening angle
14120220
wing size
max. 3m
Other
blocking in open and closed position • force adjustment through control unit • emergency release •
internal limit stops •
optional:
steel or stainless steel housing • additional bracket for opening angle
> 110° • terminal box IP66
•
Max. wing widths do neither apply to full-panel gates (but to stave or trellised gates) nor to non-horizontal gates!
•
at wings larger than 2,5 m an e-lock is required!
