9
PhotoBooth Camera Bracket Installation and Alignment
Aligning the PhotoBooth Camera
NOTE:
If any corners of the onscreen image are obscured by “tunnel vision”, as in the following example, remove the
washers you mounted on the rear of the Virtuo door prior to mounting the bracket in Installing the
PhotoBooth Camera
Bracket- Step 10
.
4. Put a mark on the floor 47 inches
away from the wall (plus or minus
half an inch), centered with the
Virtuo.
5. Using a tape measure, measure the
distance from the floor mark to the
bottom of the camera field of view.
Using the level, keep the measuring
tape vertical in both orientations as
much as possible. A small angle off
the vertical can have a large impact
on the calibration process.
