TouchTronics PowerTouch 914, Руководство пользователя

Страница: 3 / 12

1) 1 pc 914 r RF Receiver, 4 Channel
w/9” antenna wire
2) 1 set 914 h Harness - 10 wire, 9”
3) 2 pcs 914 T4 Transmitter,
4 button key chain style
Optional 914 T2 Transmitter,
2 button key chain style
Optional 914 T4XS Transmitter,
4 button oval (hand held) style
Page -3 -
Component Parts List
PowerTouch Remote Control Systems - 914 Series (2 - 4) Functions Manual C914.N2
Operation: Remote Control
Transmitters:
1) Press and release button
Or
2) Press and hold button
3) Red Status LED
Signal is sent to receiver - 1 second pulse
Signal is sent to receiver as long as button
is held. Signal will stop when button is
released.
A) LED On red indicates signal is being
sent
B) LED On bright and solid indicates
battery voltage is ok.
2 Button
1
1 & 2
2
N/a
Channel
1
2
3
4
Function
Motor or Lamp
Motor or Lamp
Motor or Lamp
Motor or Lamp
Power Output
+12v or Ground(-)
+12v or Ground(-)
+12v or Ground (-)
+12v or Ground (-)
Signal Type
Momentary
Momentary
22 sec delay (ch 4)
Momentary
Or Latching
Momentary
Or Latching
Transmitter Operation Receiver Operation
Output
5 Amps Max
5 Amps Max
5 Amps Max
5 Amps Max
*Example - Courtesy light turns on for 22 seconds when button 2 is pressed,
and the channel 4 output is connected to the courtesy lights.
All outputs must be same polarity
*See example below
4 Button
1
2
3
4
Transmitter Transmitter
Pressed at the
same time