Installing Your Walk-and-Talk Whiteboard
7
Po
ly
Vis
ion
®
Locate and have ready to use:
•
tape measure
•
phillips screwdriver
•
drill
•
level
•
safety glasses
•
pencil
•
stud finder
•
step stool
•
models WT or WTL 16xx: three wall brackets and six sheetrock
anchors with screws
•
models WT or WTL18xx: four wall brackets and eight sheetrock
anchors with screws
•
safety straps and screws
note:
NOTE:
Instructions and fasteners are provided to help you install the whiteboard
when walls have metal or wood studs. Be sure to locate wall studs and use
them to drive mounting screws whenever possible.
To position the wall brackets:
1
Choose a location on the wall with convenient access to your
computer, an AC power outlet, and a projector or network connection,
as appropriate.
2
Where possible, locate wall studs and select drill hole locations that
align with wall studs. Sheetrock anchors are provided in case studs
cannot be used.
PolyVision I&O.book Page 7 Thursday, October 16, 2008 4:18 PM
