12
Installation and Operation Guide
Po
ly
V
is
ion
®
(Windows) or system menu (Macintosh). For more information about
operating your whiteboard, refer to the
PolyVision User Guide
.
To start using the PolyVision driver and interactive whiteboard:
1
Windows
: disconnect the PolyKey.
Macintosh
: drag the PolyKey icon to the Trash or choose “Eject” from
the File menu, then disconnect the PolyKey.
2
Connect the USB cable to your computer’s USB port and the other
cable end to your interactive whiteboard. The whiteboard’s Power/
Status LED should turn green. If it remains yellow, the driver is not
properly installed.
The PolyVision driver runs unobtrusively in the background whenever your
computer is on and connected to the interactive whiteboard via the USB
cable.
LED and Status Messages on the Walk-and-Talk White-
board
Your Walk-and-Talk whiteboard provides both LED and audible feedback to
indicate the status of your system.
PolyVision driver icon
system tray (Windows)
PolyVision driver icon
system menu bar (Macintosh)
PolyVision I&O.book Page 12 Thursday, October 16, 2008 4:18 PM
