If you do not know the location of your shut-off valves or the main valve,
contact your installer or a qualified plumber.
The coating of the remote control may be peeled off due to
abrasion depending on how you use it. This will not affect
the performance of the product.
Note
Caution for using the product
Is the shut-off valve open enough?
Inspection
Solution
Solution
Problem
Water flow
is too
small
Only hot
water
Only cold
water
Temperature
cannot be
properly
adjusted
Adjust flow rate.
Page 7
Is the filter blocked
Clean the filter.
If a hot water heater is used, is it set
to an appropriate output?
Set it to an appropriate
output.
Is the cold-side shut-off valve open
enough?
Is enough hot water supplied from
the hot water heater?
Confirm the temperature
setting and operation.
Is enough hot water supplied by the
hot water heater?
Confirm the temperature
setting and operation.
Adjust flow rate.
Page 12
-
Page 7
Are the cold/hot-side shut-off valves
open enough?
Adjust flow rate.
Page 7
-
-
Is the cold-side shut-off valve open
enough?
Adjust flow rate.
Page 7
Before Requesting Service
Is the cold-side filter blocked?
Clean the filter.
Page 12
Is the hot-side filter blocked?
Clean the filter.
Page 12
Is the filter blocked?
Clean the filter.
Page 12
Trouble Shooting
21
DISCONTINUED
