Be Careful
Do not install the remote control or the controller on a metal
surface, such as stainless steel. Product may malfunction if the
signal is reflected or hindered. Likewise, it may not do well in a
kitchen with numerous stainless steel appliances.
Do not cover the remote control or the controller with metal such
as aluminum foil. Metal will reflect the signal, causing the product
to malfunction.
Test the signal before you decide upon a permanent location for
the product. Make sure it will work properly. The remote control
should be within 3 feet (1 meter) of the controller.
Make sure the remote control is secure and in a safe place before
using. If it falls or is kicked, it may be damaged. It should not be
installed where it might become a trip hazard.
If the remote control is to be installed on a plastic vinyl chloride
surface, use the adhesive strips as a base to secure it. This
should prevent discoloration of the surrounding material. The
bottom of the next page has a diagram showing the placement of
the strips.
Do not install the remote control in front of any air vents or
heaters.
Do not use near an electric converter or transformer. It may
malfunction.
Close proximity to a TV or radio may cause this product to
malfunction.
How to Use
Installation of the Remote Control
8
DISCONTINUED
