Toto WH172AT, Инструкция по установке

Страница: 3 / 20

2
重要提示：
提示:
Important:
Caution:
Neglecting this sign may result in misunderstanding of the installation instructions, which can
lead to injuries or damage to property.
!
!
!
!
ѝ൜೉ݛ໴൱Օњᇄؾշ༉য়ࢺçҧቛ൏ढ़୆نഺ༉ࢺçູݤಭ฿ࠪ෬ߑ༅௝֬ൠࡸè
൴׵ႌҦ൛ඪམ܆୆ƥ࿀ඪç࣐஍ඪًಿఝçъܲ൛ѓఝᆭࡖƗൗႯ܆୆฿ཊᄤ൴׵ႌҦ൛ඪམ܄ቛ૲Ϸ
නଃඇᇖƦ
Օනଃඇᇁ฻܉൴׵ႌҦ൛ඪམτሔཔܸୄಿè
ᄤϖս৭࿷׀౼τሔ൏౯ቕ࿝);6B;༩ਠњሠࠎᆇ֙׀њሠ
ç౯ൗႯ౩ඪࠎ༕൫֬ᇖྦ౩ࢸ࠻Ɠ೉༨ࢸְ࣡Ɣҏൡދ౩ࢸඪམ૲ϷƗ؋मႯڱ൒ྦృ֬౩ࢸ࠻Ɠ೉ƥಇ
໱ٿç๷ਟ༕൫࠻çЭְƔࠎ๔ර౶࣐ྡྷҏൡƗၢ૮ڱ൒Ѱ௬ߑ૲Ϸ֬ૌܻè
Use water or dilute mild detergent (such as dishwashing detergent) to scrub and clean the surface, Never use strong
corrosive detergent (such as cleanser, paint thinner, benzene and so on) or wire ball to scrub, and to avoid corroding
the surface of the product.
ç೉ݛ୤ྺးٳఠЮӈ௝Ɨ౯༆ࢃఊቛເ၉ϵഺࠊঞࠔ԰য়Ɨ౯၎ᅽٌ݆ࣣႵ؆৲֬ߴ൳฿༩࣐ྡྷލ൨֬԰
য়ç߲ڶދߴ൳è
Please dispose of this product in accordance to the local waste disposal laws and regulations.
1. Functions of the manual concealed cistern: storage water, inlet and outlet calve vessel, frame of wall-hung toilet,
The function reflected in the manual actuator panel instructions.
2. This instruction manual only supports the installation of the manual concealed cistern.
3. For Australia, the installation has to be in accordance with AS/NZS 3500 series of Standards and/or local standards.
ሆၰൠར
Cautions
౩ࢸçٳ༅԰য়
Cleaning and waste disposal
଩੪
Table of contents
P. 3
···
P. 4
···
注意事项
Cautions
简易故障判断及处理方式
Self diagnosis and troubleshooting
安装说明
Installation instructions
P. 2
···
P. 1 6
···
维修保养
Servicing procedures
3
温馨提示：
Note:
!
!
ၢ༶ѝ۳֬໠฼׋֬԰য়١ٌᇖႼሆଃƓᆓؚႯ߃Ɣ֬ƗႯ߃ढ़ၢҜᅽሸྡྷࢺबè೉ݛࢺब҉ਛƗ࿿໊࣓ࣣᆾ
׮֬٫ሌ၃ಭ൝࣐ྡྷሸྡྷҾࢺދໂྰƗྺࠪ൏৺༩པ႒֬ሌ၃ಭ൝ࢺबƗь૮໠฼ছսߋࠎӈഺ҉шး֬ગٗ
ދ෬൅è
Users may fix the problems on their own if the corrective action is to be taken by the user according to the chart below.
Non-professionals are prohibited from disassembling and repairing the product. Please contact the relevant professionals
for futher troubleshooting to avoid aggravating the problem.
ӏࡵܪᅷ
ඪམ໴ٌ࣐ඪ
ඪམႼඪ҉ؕ
ੇ֥છ๨ৡ
ჷႀ ԰য়١ٌ
ç್߃ቀ࣐ඪቀً໊ाచࠎ๛ඪè
çඪམ࣐ඪً໊࢟ռाè
ç࣐ඪًڣ๪Ⴜၺ༅़ህࠎ࣐ඪًԵ׵ܙ
ࡸൗ֫ڣ๪໴ٌᆥӏ༶઒è
ç஍ԩၢഏჷႀƗ၎ಝ໴ٌ࣐ඪè
çඪམԢඪ८ç஍ඪֿًቝᇢຽႼၺ༅
Ɠజు൏҉ཱིྖל࣐ಇ֬೰ࢄç്ཱིॽ
ְƔƗᄶӵ஍ඪً໴ٌޚށ֬૨хè
ç૲Ϸןࢲઋۍບ੤ҍٺ௑ӐƗ૲Ϸሔഏ
ޱᄶӵ஍ඪًᆿඪ࢒׎ܬ׮ᄤଝ၉໑ᇉ
ഏƗ໴ٌ૨хè
çᄤඪམৡ૲֬૲Ϸןࢲઋۍ௑ӐƗ׫֥
ඪམୄҍ֬ѐᆵ೏ܼࠎఊඪམམ฿ഏƗ
Ⴜ൏߽໴ٌߴ໑è
çռा࣐ඪቀًࠎ৺༩༅၃ࢺब
ƓᆓؚႯ߃Ɣ
çռाඪམ࣐ඪً࢟
Ɠᆓؚሌ၃ಭ჻Ɣ
çࡦҷ࣐ඪًѰ஍ԩၺ༅
Ɠᆓؚሌ၃ಭ჻Ɣè
ç۾ߗ࣐ඪً
Ɠᆓؚሌ၃ಭ჻Ɣè
ç౩য়ඪམୄҍ֬ၺ༅
Ɠᆓؚሌ၃ಭ჻Ɣè
çןᆣ૲Ϸןࢲઋۍ֬໑ᇉ
Ɠᆓؚሌ၃ಭ჻è
ç࡮ؒןࢲઋۍ
Ɠᆓؚሌ၃ಭ჻Ɣè
Common faults
Water does not
flow into the tank
Water is
constantly
running into
the bowl.
Possible causes Corrective actions
1 Household water supply has not been turned
on or has been cut off.
2. Angle valve has not been turned on.
3. Residuums in the inlet valve causing the float
device to not operate properly.
4. None of the above.
1. Flush valve seal is not completely closed due
to residuums around the outlet of the cistern
and flush valve (sand or debris lodged in
during installation).
2. The exposed part of the panel's adjust screw
is too long, which resulting the rubber of flush
valve can not fixed in a certain position and
can not sealed.
3. The part of panel's adjusting screw in the
cistern is too long, which may get stuck in the
soft pipe or cistern body and unable to return
sometimes.
1. Turn on the household water supply or
contact the relevant personnel (To be
done by the user).
2. Turn on the angle valve
(To be done by professionals only).
3. Check the fill valve and remove the
residuum
(
To be done by
professionals only).
4. Change the inlet valve
(
To be done by professionals only
)
.
1. Remove the residuums in the cistern
(To be done by professionals only).
2. Adjust the position of the panel's screw
(To be done by professionals only).
3. To cut back the adjust screw
(To be done by professionals only).
࡬ၥܪᅷ஘ؕࠪ԰য়١ٌ
Self diagnosis and troubleshooting