Toto WH172AT, Инструкция по установке

Страница: 17 / 20

17
清洁进水阀滤嘴
Cleaning the Filter of the Fill Valve
1. Close the water shutoff valve, and then remove the fill valve as
described above.
2. As shown in pic A, disassemble the fill valve and clean the filter screen in
FIG. A with water or clean the dirt with a brush.
3. To install, follow the procedure in reverse to return the fill valve to
its original position.
A
B
如图A所示，拆开进水阀，然后用水清洗图A过滤网，
或者用刷子清除污物。
按照与上述相反的步骤操作，便能将进水阀安装回原
来的位置。
按上述操作，关闭进水角阀，然后拆下进水阀。
1. Close the water shutoff valve, and then remove the fill valve as
described above.
2. If there is any abnormality after cleaning as shown in pic A,
disassemble the fill valve as shown in pic B, then clean the
filter screen in pic B with water, or clean the dirt with a brush.
3. To install, follow the procedure in reverse to return the fill valve to
its original position.
如果按图A方式清洗后还有异常，再如图B所示，拆开进水阀，
然后用水清洗图B过滤网，或者用刷子清除污物。
按照与上述相反的步骤操作，便能将进水阀安装回原
来的位置。
按上述操作，关闭进水角阀，然后拆下进水阀。