Inspection
5
6
3
1
1
Filter
Open/shut
Tool
Confirm the following items after installation.
Confirm there is no water leakage.
Check for leakage
Confirm the pipe is not
rusted or broken, then
install it again.
Water leaks from A-D
Confirm that the gasket
has been installed, then
fasten the nut.
Water leaks from C
Water leaks from B
Upper
Installation
fitting
Installation
Legs
2
Cap nut
Lower
installation
fitting
Ａ
Ｂ
Ｃ
D
Is the installation fitting stall?
−
4
Does the cap nut get loose?
Is the installation leg
stable?
−
3
Is the filter blocked?
2.See Clean the filter
Open the stop valve completely
Is the stop valve open?
Confirm there is no shaking.
Confirm the shaking
If the flow is small or the temperature is
inappropriate, check the following item.
Check the flow and temp.
※The Operation Manual attached to the delivery must be provided to the customer.
This is Printed on Recycled Paper.
1
2
3
5
6
6
Stop
valve
(cold)
Stop
valve
(hot)
Check if the O ring is abnormal,
if it is shifted to one side during
installation,
you should install it again.
Refer to Install the
Installation Fitting
Refer to Install the
Installation legs
Does showerhead
have movement or looseness?
−
5
4
Refer to Install the
showerhead
4
Showerhead
6/6
