3
ENGLIS
H
Gasket
Hex wrench
(1.5mm)
Shower head
Escutcheon
Disassembly tool
1. Slide escutcheon onto shower arm until flush to surface.
To make assembly easier, lubricate o-ring inside escutcheon with water.
2. Screw showerhead onto shower arm.
3. Tighten set screw.
BEFORE INSTALLATION
INSTALLATION PROCEDURE
Observe all local plumbing codes.
Make sure the water supply is shut off.
Read these instructions carefully to ensure proper installation.
Make sure there are adequate mounting supports.
TOTO reserves the right to update the product design without notice.
Check to make sure you have the following parts indicated below:
Product is heavy. Make sure there is adequate mounting support prior to
installation.
Thoroughly clean and remove debris from the water supply pipe before
installation to prevent clogging the spray outlet.
To avoid leakage, do not move the showerhead after installation.
CAUTION:
Shower arm
(sold separately
TS110MW16#$$)
Shower arm
(Sold separately
TS110MC16#$$)
Escutcheon
Ceiling mount
Wall mount
Shower head
THANKS FOR CHOOSING TOTO!
Thanks for Choosing TOTO!........................................................................... 2
Care & Cleaning..............................................................................................2
Warnings.........................................................................................................2
Common Tools Needed..................................................................................2
Before Installation............................................................................................3
Installation Procedure......................................................................................3
Warranty..........................................................................................................4
Rough-in Dimensions ....................................................................................14
TABLE OF CONTENTS
WARNINGS
COMMON TOOLS NEEDED
CARE & CLEANING
2
Your new showerhead is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with mild soap, rinsing
thoroughly with warm water and drying with a clean, soft cloth. Do not use
abrasive cleaners, steel wool or harsh chemicals, as these will dull the finish.
Failure to follow these instructions may void your warranty.
If any nozzles become clogged with mineral build up, rub gently with finger tips
to clean.
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
For safe operation, please observe the following:
Minimum pressure.........20 psi (138kPa), dynamic
Maximum pressure........80 psi (551kPa), static
It is suggested to use the temperature below 140°F(60°C).
Do not use steam for hot water supply.
Do not use the product at an ambient temperature below 32°F (0°C).
Recommended operating pressure:
Screw driver
Adjustable wrench
Sealing tape
ENGLISH