7
3) Installation of the Valve
(Stem Adapter, Limiter Collar and Temperature Limiter)
Trim installation should not be begun until the
followings are confirmed:
1) Checking the water flow
2) Checking the filters
Caution
Stem Adjuster
Thermostatic
Mixing valve
Ԙ
Install the stem adapter into the valve as shown.
Finished W
all
Limiter Collar
1” (25 mm) MIN
1-3/8” (35 mm) MAX
Confirm that distance between Finished Wall
and top of Limiter Collar is between
1”
(25 mm)
and 1-3/8” (35 mm
).
If not, Spacer should be removed as follow:
How to remove the Spacer
Loosen.
Tighten.
Spacer
Right above
Circle Mark
Stem Adjuster
Limiter Collar
Temperature
Limiter
Temperature
Limiter
Stem Adjuster
Limiter Collar
1)
Take out the Stem Adjuster, unscrew the
Limiter Collar and pull out the Temperature
Limiter.
2) Then, Remove the Spacer as shown.
3) Attach the Temperature Limiter, making
sure that Circle Mark on the Limiter align
with middle top point of the valve.
4) Then, tighten the Limiter Collar and
reattached the Stem Adjuster.
1) Be sure to reattach the Temperature
Limiter.
2) Tighten the Limiter Collar firmly.
3) Make sure the Circle Mark points
upward.
Caution
middle top point
ENGLISH
