7
ENGLISH
INSTALLATION PROCEDURE (continued)
Installing the Pop-up Drain with Cable
(Only for TL170DD/TL170DDLQ)
1) Apply pipe tape to the threads of the
drain body.
2) Insert drain body into the drain hole.
3) Assemble the gasket, flange nut and
lock nut to drain body.
4) Apply pipe tape to the end threads of
drain body and install the tail piece.
5) Make sure that cable faces toward the
faucet.
6) Connect the cable base connector with
cable handle connector.
Flange
Drain Body
Drain Gasket
Flange Nut
Lock Nut
Lavatory
Drain Body
Lock Nut
Cable
Tailpiece
Drain Lever
Cable Handle
Connector
Cable Base
Connector
Cable
Tailpiece
U-cup Seal
Drain
Body
Pop-up
Drain
Seal
Nut
Drain Lever
Cable Handle
Connector
Clip
Cable Base
Connector
Cable
Press the clip
to be able to
connect
Groove, where the
connection is made
Clip
CARE & CLEANING
For the best performance and cleanliness, please maintain your faucet every day.
1) Unscrew the aerator. Use spout key provided.
2) Use a brush to clear the dirt and debris from the aerator.
3) Reinstall the aerator. Use spout key provided.
C AUTION: Be careful not to lose the parts when they
are removed.
To ensure that the product maintains its specified flow
rate to meet EPA standard, always use the manufacturer’s
specified aerator for that faucet.
Aerator
Spout Key
Unscrew it
Brush
Aerator
Maintaining the Water Outlet
Cleaning the Faucet
• If slightly dirty, use water and a damp cloth to wipe away the dirt completely.
• If very dirty, use a cloth with diluted detergent to wipe away the dirt, then rinse and dry.
CAUTION!
Do not use the following materials, which are harmful to the faucet’s surface finish:
• Acidic cleaning agents, alkaline cleaning agents, or bleaches, except for TOTO scale cleaner
• Solvents like thinner or benzene
• Cleaning agents or grinding powders that contain coarse particles
• Nylon scrubbers and brushes
