Feed inlet filter
Flow regulator
Feed inlet filter
flow regulator
*Pay attention to the
direction
2
5
3
3.Close
Light up
(Top: Orange)
(Bottom: Green)
Rotate clockwise
MAINTENANCE : FEED INLET FILTER
2. Remove dust from the filter and rinse the flow regulator with water.
Rinse in water and wash
Dust accumulates inside the filter.
Please inspect carefully.
After cleaning
1. Turn on the water supply at the stop valve and
inspect all the connections for any leaks.
2. Insert the power plug.
3. Press the “TANK FILL” switch and check
that water comes out of the spout.
4. Attach the top cover.
5. Press the “HEAT” switch to “ON”.
Start heating operation.
The “HEAT” (Green) lights up. During heating,
the “HEATING” (Orange) also lights.
Attention
Be careful not to drop into the
washbasin drain.
3. Attach the feed inlet filter with the Steel Filter Key.
NOTE
Be sure to install the flow regulator (Otherwise, the product may break down.)
NOTE
Do not turn on the “HEAT” switch when there is no water in the tank.
Dry Firing will occur which could result in malfunction or an accident.
ENGLISH
31
