9-3/64”
(230)
3-45/64
”
(94)
1-7/8”
(47)
Mounting bracket screw
hole position
Anchoring plate
screw hole position
Mounting bracket
screw hole position
Counter
Ruled line
Controller
Floor
Wall
Controller
3-45/64
”
(94)
2” (50)
Min
1-1/2
”(38)
Ruled line
Anchoring plate
screw hole position
(Scale: inch(mm))
(Scale: inch(mm))
2-43/64
”(68)
Top cover
INSTALLATION PROCEDURE
Mounting on the wall
Referring to the “SET-UP DRAWING”, determine
the fastening location of the Controller, and with
reference to the “DIMENSIONS”, mark the hole
locations for the mounting bracket and anchoring
plate on the wall.
Install the Controller
1) Mark screw hole locations for installation fittings
Securing on the floor
* When installing on the floor, keep at least 2” away
from walls.
2) Install
1. Remove the top cover from the Controller
(refer to diagram on right).
2. Draw in the power cord and adjust the length as below based on the position of the power
outlet.
NOTE
There is a risk of damage when placing the Controller on the floor temporarily.
Please line the floor with the cushioning material from the packaging, etc. before starting
work.
IMPORTANT!
Be sure to install product in correct orientation as shown. Otherwise, product will
not function properly.
ENGLISH
12
