56
Troubleshooting
First, try the actions described on pages 56 to 63.If the problem persists, consult
the installer, seller or the contact listed on the back cover of this manual.
■
●
All LEDs on the display of the top unit are fl ickering.
(Unplug the power plug or turn off the breaker of the distribution board and
contact where to call shown on the back cover.)
■
●
The CLEAN indicator does not light up.
(It is time for parts replacement.
→ Page 62)
CAUTION
If a water leak
occurs, close the
shutoff valve.
Please check fi rst
Is the
POWER LED lit?
■
■
Does the LED light up when
you press [POWER ON/
OFF] on the top unit?
■
■
Is the [POWER ON/OFF]
fl ashing?
■
➞
Anti Freezing setting is "ON"
(Page 50, 53)
■
■
Is the breaker on the
distribution board turned
on?
■
➞
Check whether there is a power
outage or the breaker has turned
"OFF".
POWER ON/OFF
POWER LED
Is the ENERGY
SAVER LED lit?
■
■
While the LED is lit, energy saver
(Page 26)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote
control working?
■
■
Is the Low Battery Warning
LED on the top surface
of the remote control
fl ashing?
■
➞
Replace the batteries. (Page 52)
■
■
Is the remote control
transmitter or the remote
control receiver blocked?
■
➞
Remove obstructions, dirt, water
droplets or any other blockages.
Battery cover
Close
Open
The remote
control uses
batteries
to operate.
Remote control transmitter
Remote control receiver