14
Preparation
Using the Product for the First Time
If the remote control is secured
(for anti theft)
1
Remove the screws (2, left
and right) from the remote
control fi xture.
Remote
control
Remove
Hanger
Screw
(2 pieces,
left and right)
Wall
（
View from side
）
Phillips
screwdriver
(Fine-tip type)
2
Remove the remote control
from the hanger.
Remote
control
Hanger
Wall
■
■
To secure the remote control again
Tighten and fi x the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger.)
1.Insert the battery
1
Remove the remote control
from the hanger.
Remote control
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery cover
Close
Open
■
●
When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
■
●
The display goes out when no button on the
remote control is pressed for 1 minute or
more.
WATER TEMP
SEAT TEMP
DRYER TEMP
3
Mount the remote control in
the hanger.
■
■
About the batteries
■
●
Use dry cell, alkaline batteries. Follow the instructions
below to prevent the batteries from rupturing or
leaking fl uid.
■
•
When replacing the batteries, use new batteries of
the same brand.
■
•
If you will not be using the remote control for a long
time, remove the batteries.
■
•
Do not use rechargeable batteries.
