53
Freeze Damage Prevention
TCF9786WA only
Dynamic mode
This method runs the water for the bowl unit and wand automatically at a fixed interval in order to prevent freezing.
■
■
How to Set
(Page 50)
■
•
Switch ANTI FREEZING to ON with the remote control.
(Flickering: green)
The toilet flushes
at intervals of
about 10 minutes.
Water comes out
from near the wand
at 5 minute intervals.
While ANT FREEZING is set to ON, it works as follows.
■
•
The POWER LED flashes.
■
•
The toilet flushes at intervals of about 10 minutes.
■
•
Aabout 50 ml of water comes out from near the wand at intervals
of 5 minutes. (The wand remains retracted.)
When the ambient temperature is likely to drop to 0°C or lower, take measures to prevent freezing.
Attention!
■
●
When the ambient temperature is likely to drop to 0°C or lower, do not use the energy saver feature. (May damage the product.)
■
●
Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 0°C.
■
●
Before starting work, set "AUTO FLUSH" (Page 42) and "AUTO OPEN/CLOSE" (Page 44) to "OFF".
Reference
Maintenance
Operation
Introduction
Reference
Maintenance
Operation
Introduction
