52
What to Do?
If there is no water due to a power outage or water failure
1
Use a bucket to flush water.
Large bucket
Newspaper, dustcloth, etc.
Pour strongly,
aiming at the center
of the bowl unit.
2
If the water level is low after flushing,
add more water.
●
•
Prevents odors.
Attention!
■
●
If there is a water supply failure, set the auto bowl unit
cleaning to "OFF".
■
●
When the power or water supply is restored, be sure to
perform a flush.
(To prevent waste from remaining in the drain pipe.)
If you cannot operate with the remote control
■
■
Operation is also possible using the
buttons on the control panel.
Control panel
■
■
If the low battery
warning LED is
flashing, replace the
batteries.
Low battery warning LED
■
■
Replacing the batteries
1
Press [POWER ON/OFF] on the control panel.
●
•
The POWER LED goes off.
2
Remove the remote control from the hanger.
(Page 14)
POWER LED
Control panel
3
Open the cover and replace the AA
batteries.
(Page 14)
4
Mount the remote control in the hanger.
5
Press [POWER ON/OFF] on the control panel.
●
•
The POWER LED lights up.
